ISRI2017: Finer points of separation
ISRI2017: Finer points of separation
<![CDATA[
Valuable bits and pieces of metal have long been created by auto shredding plants, and equipment companies say they are getting increasingly better at harvesting these smaller units. Three vendor representatives spoke at a session on advancements in metals recovery at ISRI2017, the annual convention of the Washington-based Institute of Scrap Recycling Industries (ISRI).
Tim Shuttleworth, CEO of Pennsylvania-based Eriez, said increasingly powerful magnets are helping ensure shredder operators capture as close to 100% of the iron and steel content as possible.
Recyclers and vendors alike are refining their techniques to use a combination of drum, suspended and pulley magnets to harvest ferrous scrap from fist-sized chunks to the smallest fines. Shuttleworth said operators also have learned how to spread material out onto conveyors so they are “using the full width of the separation equipment” being deployed to collect metal.
The Eriez CEO said his company’s Stainless Steel Separator has been designed with “many thousands of gauss” to operate downstream from the other ferrous magnets to attract stainless steel pieces.
Didier Haegelsteen of Italy based SGM Magnetics said eddy current separators are being refined and upgraded to address the “30 to 40 percent” of shredded output considered as “fines,” or pieces below 3/8-inch in size.
Along with specialized magnetic equipment, Haegelsteen said gravity separation processes “can be a fantastic complement, if properly used” to help shredder operators capture more metal.
He said a three-stage downstream system developed by SGM consists of pre-concentration, concentration and polishing stages to help produce metals streams of high value. Haegelsteen such a system focusing on fines can yield $70 to $74 per ton off additional saleable materials at Spring 2017 commodity prices.
Robert Broughton of Kentucky-based SteinertUS said the use of sensors in downstream shredder applications “have come a long way in the last decade,” noting that X-ray, induction, infrared and other technologies can now all be deployed to help identify and harvest metallic units.
Broughton said specialized equipment designed by Steinert can help capture commodities such as “angel-hair zurik and very small wire” that formerly slipped through. He also said plastic circuit board pieces that can potentially contaminate zorba and other mixed metals can be captured via optical equipment designed to identify plastic.
Eriez’s Shuttleworth summarized the work of vendors such as the ones on the ISRI2017 panel by saying they are “trying to move the word from hand sorting to a more automated approach.”
ISRI2017 was in at the Ernest N. Morial Convention Center in New Orleans April 22-27, 2017.
]]>
Source: Recycling Today
ISRI2017: Finer points of separation
<![CDATA[Valuable bits and pieces of metal have long been created by auto shredding plants, and equipment companies say they are getting increasingly better at harvesting these smaller units. Three vendor representatives spoke at a session on advancements in metals recovery at ISRI2017, the annual convention of the Washington-based Institute of Scrap Recycling Industries (ISRI). Tim Shuttleworth, CEO of Pennsylvania-based Eriez, said increasingly powerful magnets are helping ensure shredder operators capture as close to 100% of the iron and steel content as possible. Recyclers and vendors alike are refining their techniques to use a combination of drum, suspended and pulley magnets to harvest ferrous scrap from fist-sized chunks to the smallest fines. Shuttleworth said operators also have learned how to spread material out onto conveyors so they are “using the full width of the separation equipment” being deployed to collect metal. The Eriez CEO said his company’s Stainless Steel Separator has been designed with “many thousands of gauss” to operate downstream from the other ferrous magnets to attract stainless steel pieces. Didier Haegelsteen of Italy based SGM Magnetics said eddy current separators are being refined and upgraded to address the “30 to 40 percent” of shredded output…